3. Assembly

Before You Begin

Carefully unpack all components. Remove all protective packaging materials before assembling the appliance. Verify that every accessory listed in the package contents is present.

Step 1 – Attach the Handle

  1. Align the handle with the opening on the vacuum body.
  2. Slide the handle downward until it is fully seated.
  3. Listen for the locking click.
  4. Tighten the retaining screw if supplied.

Step 2 – Install the Extension Wand

  1. Insert the extension wand into the hose connector.
  2. Rotate gently until secure.
  3. Ensure there is no movement after installation.

Step 3 – Attach the Floor Brush

  1. Connect the floor brush to the end of the wand.
  2. Push firmly until the locking tab engages.
  3. Check that the brush rotates freely.

Accessory Storage

The crevice tool and dusting brush may be stored on the accessory holder attached to the vacuum body for easy access.

Tip: After assembly, gently pull on each connection to ensure all parts are securely locked before use.